The ARRI SRH-360 is a fully stabilized, 3-axis remote head for payloads up to 66 lbs (30 kg) which allows cameras to go where no person can on set, in a studio, or at an event, with increased flexibility and ease.
Quiet, smooth and stable, high precision rails
Low profile (can be operated on the ground)
Simple design allows for quick adjustment
Stabilized Axis3 (Pan, Tilt, Roll)
Max. Payloadup to 66lbs/30Kg
Ring Height Centre8.23in/20.9cm
Max. Tilt Range+60° / - 110°
Max. Roll Range+/- 90°
Max. Pan RangeSlip Ring, Unlimited
Max. Pan Rate240° / Sec.
Max. Tilt Rate240° / Sec.
Operating Voltage24V - 36V
Output Camera12V & 24V
Videoup to 12 G single link support
SAM plates compatibleYes
Environmental-20° to +50° / -4° F to 122° F
Performance – Upgraded high torque motors allow the gimbal to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car, and keep it moving smoothly in flight.
Boosted Torque – With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75 mph with camera builds as heavy as 30 pounds. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02° of accuracy of its predecessors.
Versatility – A detachable grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the handgrip is not needed. In addition to handheld work, the Ronin 2 supports mounting on cable cams, drones, Steadicams, vehicle mounts, and more.
Simplified Operation – Making fine adjustments, which is essential for proper camera balancing, is now simplified with integrated adjustment knobs and a re-designed camera mounting base.
Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°
FREEFLY MōVI XL
The FREEFLY MōVI XL 3-Axis Motorized Gimbal Stabilizer supports cameras and accessories weighing up to 50 pounds, so it is designed to be mounted on a remote head, jib or other support gear to create smooth cinematic moving shots. It uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted
Custom in house designed high torque direct drive motors
Axis locks for easy ground handling / balancing
Custom motor drives with high resolution encoders
Capable of performing at extreme speeds (75+mph)
Integrate Focus / Iris / Zoom motor drivers
Integrated control of Red cameras via RCP
3+ hour runtime powering gimbal and camera with onboard batteries (sold separately)
Completely wireless operation (power, video, control) allows for 1 minute changes from camera car to crane to cable cam
Underslung or overslung mounting
Compatible with Freefly Ecosystem - MōVI Controller, MIMIC, Pilot
50lb max payload
Capable of traveling as excess baggage on airlines
Quick Release system (Optional)
Travel case with custom cut foam insert (Optional)
2 second boot time
10 second full system autotune (no more manual tuning!)
Integrated screen and menu system
iOS and Android App for control, configuration, and feedback
The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 pounds, rendering it compatible with mirrorless cameras all the way up to smaller cinema cameras. With the included batteries, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro.
MōVI Pro Digital 3-Axis Camera Stabilizer
Innovative structural design for ease of use, convenience, strength, and versatility
Dual hot-swappable 22.5V 1.8Ah batteries with status indicators
Integrated focus/iris/zoom controller
Embedded screen for tuning/customization
Increased motor torque over previous generation stabilizers
D-Tap outputs for camera and accessory power
Full stiffness and filter auto-tune in approximately 10 seconds
Compatible with MōVI Pro applications for iOS and Android
Dual GPS (top and bottom) for solid signal in Sky or GroundView
Full RED RCP integration (focus, iris, ISO, start/stop, and more)
Internal long-range 2.4 GHz frequency hopping radio for connection to MIMIC
Compatible with separately available Low Profile Handle and Classic Handle
AURORA REMOTE HEAD
Pan/Tilt Speed 120 deg/sec
Pan/Tilt speed and damping adjustable via rotary knobs on the control console
Pan and Tilt Direction set via switches for direction and neutral
Hand wheel or optional joystick/pan and tilt operation
Easily set limits and feathering for limits
The Aurora takes only minutes to set up as the system uses just one cable between the console and the head.
The controls are intuitive and easy to use – minimizing time on set familiarizing yourself with the unit.
Cable management is fluid, with large holes in the center of the motors to pass cables through, enabling full 360° moves without the threat of tangling or severing.
Although compact and lightweight, the Aurora LT has been designed to take full size camera packages and is easily expanded for larger cameras.
It can also be made extremely compact, to get the camera into awkward space ensuring superb flexibility for every shoot.
The Aurora LT Remote Head sets new standards for ease of use, versatility and functionality.
Head Weight: 35lbs
Max Camera Payload: 77lbs